Matte Wheel Seal is a high-tech synthetic protective coating which prevents the build up of brake dust. Its formula has extremely high heat resistance so it will last even if you take your ride to the track. Matte Wheel Seal prevents damage caused by brake dust, road tar, and other road contaminants. It's designed for wheels with a Matte finish and no shine. What Makes This Product Unique? 1. Wheels get hot. This creates a problem when looking for a protective coating for your wheels. Many products out there are wax based, meaning that their melting point is far lower than the temperatures your wheels will reach just driving down the highway. Matte Wheel Seal uses a technologically advanced synthetic formula. 2. Nothing is a bigger pain to clean than brake dust. Matte Wheel Seal provides a layer of protection in between your wheels and brake dust, meaning you won't have to use caustic chemicals to remove brake dust filaments. When your wheels are protected with Matte Wheel Seal, just spray them down and watch the brake dust slide right off. Reapply after rinsing and you're always covered. 3. Not only are embedded contaminants a pain to remove but they can be very damaging to your wheel's surfaces. Pitting, etching, and clear coat corrosion are all legitimate concerns when it comes to your wheels, especially if they're unprotected. If you use Wheel Seal your wheels will never be exposed to these elements, and you'll never have to worry about damage caused by accumulated debris again. Direction: Before use, be sure the wheel is clean and dry. Apply Matte Wheel Seal using a soft cloth. Let it cure by leaving it on the surface for several minutes, then use a soft cloth to hand buff for optimal protection. For maximum results, begin by cleaning the wheels with our Premium Wheel Cleanser, then prep with Exterior pH Neutralizer before applying Matte Wheel Seal. Before applying, test a small amount in an inconspicuous place to check compatibility with surface.