_ Downloads

|| e-books, manuals, guides ||

  Guide to thickness calculation of heater tubes
  A paper on "Corrosion Under Insulation"
  Discriptive overview of "Flexible Couplings"
  Flow Orifice sizing and selection
  API-582 based Welding guidelines
  Failure Analysis - Methodology
  Reformer Tube Life Assessment
  Venturi Tube Design

 

|| softwares ||

  WeldShop WeldShop r1.0.1 beta (Release date: 30th April 2010)
   

WeldShop is a user friendly welding software for Welding and Inspection Engineers to have a quick reference regarding welding requirements for different materials. The current beta version is the first release by thePetroStreet team which only deals with the welding of selected piping materials and its components in carbon steel and low alloy materials as per ASME B31.3. The suggested welding procedure contains an outlined detail for preheat, interpass temperatures, filler wire & electrode, and post weld heat treatment. Users are advised to further look into the applicable code for their specific requirements.

  KOD Mart KOD Mart r1.0.1 beta (Release date: 04th July 2010)
   

KOD Mart is a sizing software that helps a design engineer to select and verify the size of KnockOut Drums. It calculates the recommended diameter based on GPSA /API and suggests vessel diameter based on thePetroStreet experience. Evaluation of liquid levels and nozzle size selections will be easier by using this handy software. This software evaluates vessel diameter for both vertical and horizontal types. This version does not include any evaluation of demister pad effects and three phase sepeartion.

  NDT Shop NDT Shop r1.0.3 beta (Release date: 31st July 2010)
   

NDTshop is a small utility which enables all engineers in petrochemical industries to see applicable / recommended NDTs on their new and modified piping system. Engineers have to provide the piping service conditions which would then trigger the NDT requirements for the welded joints. The first release will only cover these requirements in the light of ASME B31.3.

  Psychro Shop PsychroShop r1.0.3 (Release date: 14th August 2010)
   

Psychro Shop is a very helpful and amazing utility for engineers, that can easility calculate humid air conditions based on your selected inputs.This software is based on ASHRAE Handbook (2001 Edition) and GPSA Engineering Data book (2004 Edition). This handy software can evaluate Dewpoint Temperature, Relative Humidity, Humidity Ratio (Absolute Humidity) and Wet Bulb Temperature, based on user input of any one of these values along Dry Bulb Temperature and Barometric Pressure (or Altitude).

  Repair Shop RepairShop r1.0.0b (Release date: 29th August 2010)
   

RepairShop has been designed to help engineers working with the repair options for defected or problematic pressure vessels, piping and heat exchangers tubes / tubesheets designed and installed against applicable ASME codes. Repair suggestions are in 100% compliance with ASME PCC-2 (A post construction committee released code) which deals with repairs of piping and pressure vessels. It helps user to short list the repair options and then to perform undertake all sort of repairs in accordance with ASME PCC-2. It also provides brief description of all the repair options so that user must take care of that.

  Turbo Mart TurboMart r1.0.01b (Release date: 13th November 2010: 16th November 2010)
   

TurboMart is a smartly designed utility to help engineers across petrochemical, power and oil & gas sector for the performance evaluation of steam turbines and gas turbines. It has a built-in property package for basic fuel components. This release will take care of thermal efficiencies, heat rate and power output of gas turbine, where as isentropic efficiency and power output of steam turbine.

  ClampOx ClampOX r1.0.0b (Release date: 18th July 2011)
   

ClampOX is capable of designing both hot box-up (welded) and cold box-up (bolted) based upon user's input. The salient features of ClampOX includes; Basic clamp thickness calculations based on ASME VIII pressure design formula; Calculation of weld leg dimension for hot box-up (welded); Basic clamp thickness calculations for cold clamp on ASME VIII and structural analysis against line pressure / injection pressure; Commonly available and used materials for clamps / pipe / lug have been listed along with their stress values against input temperature.

  Rectank RecTANK r1.0b (Release date: 19th August 2011)
   

RecTANK® is capable of designing atmospheric rectangular tanks. The software has been developed in-line with Roark's Formulas for Stress & Strain. It performs design both for unstiffened and stiffened tanks (horizontal or vertical stiffening with top edge stiffening). It provides user the minimum wall plate thickness, its deflection (maximum and allowable) and bottom plate thickness. The most attractive feature of RecTANK® is its ability to provide user the flexibility of changing the actual plate thickness on the run and see the values of maximum deflection if comes under allowable limits. For stiffening, angle iron members data have been made part of the software for ease of use.

     

 

All rights reserved to thePetroStreet (c)