Fretting Corrosion

For students and fresh graduates

Fretting Corrosion

Postby ashfaqanwer » 24 May 2017, 09:55

Fretting corrosion

Fretting corrosion refers to corrosion damage at the asperities of contact surfaces. This damage is induced under load and in the presence of repeated relative surface motion, as induced for example by vibration. Pits or grooves and oxide debris characterize this damage, typically found in machinery, bolted assemblies and ball or roller bearings. Contact surfaces exposed to vibration during transportation are exposed to the risk of fretting corrosion.

Damage can occur at the interface of two highly loaded surfaces which are not designed to move against each other. The most common type of fretting is caused by vibration. The protective film on the metal surfaces is removed by the rubbing action and exposes fresh, active metal to the corrosive action of the atmosphere.
Site Moderator
Posts: 875
Joined: 16 Mar 2010, 03:36

Return to Mechanical Engineers

Who is online

Users browsing this forum: No registered users and 1 guest