ClampOX® - Piping Box-up / Clamp Design - Released

Here you can find FREE Engineering Softwares for your day-to-day working, engineered by professional and experienced team.

How do you rate ClampOX?

You may select 1 option

 
 
View results

ClampOX® - Piping Box-up / Clamp Design - Released

Postby ashfaqanwer » 25 Jun 2011, 11:10

thePetroStreet team is about to release their next engineering software "ClampOX®" focusing on box-up /clamp design for piping leakages.
ClampOX® is capable of designing both hot box-up (welded) and cold box-up (bolted) based upon user's input.

Get your FREE copy:
clampox_setup.zip


Watch ClampOX video: http://www.youtube.com/watch?v=arZLnG47VhA

The salient features of ClampOX® are as follows:
1. Basic clamp thickness calculations based on ASME VIII pressure design formula
2. Calculation of weld leg dimension for hot box-up (welded)
3. Basic clamp thickness calculations for cold clamp on ASME VIII and structural analysis against line pressure / injection pressure
4. Commonly available and used materials for clamps / pipe / lug have been listed along with their stress values against input temperature
5. Provides liberty to the user for input of all required data if not in scope of ClampOX material library
6. Provides all the required output which a design engineer would require
7. Detailed sketch of cold box-up with all required dimensions including:
a. Clamp thickness
b. Lug thickness
c. Lug length
d. Lug width
e. Weld leg dimension for lug attachment
8. For bolted clamps, ClampOX generates the required bolt diameter and bolt spacing also however number of bolts have to be specified by user
9. General notes have been provided within the software for basic information of user
10. Free for use

Here is the first look of ClampOX®:
clampox.png


You are welcome to provide your comments / suggestions.
You do not have the required permissions to view the files attached to this post.
ashfaqanwer
Site Moderator
 
Posts: 875
Joined: 16 Mar 2010, 03:36

Re: ClampOX® - Piping Box-up / Clamp Design

Postby qaisarabbas » 26 Jun 2011, 05:46

I am sure that ClampOX will be an excellent software for us. Again thumbs up for TPS teams memebers, who are helping the engineers community to their best. Good luck.

Regards
Q. Abbas
qaisarabbas
Core Member
 
Posts: 296
Joined: 23 Mar 2010, 15:21
Area of interest: Metallurgy Engineering

Re: ClampOX® - Piping Box-up / Clamp Design

Postby ben » 26 Jun 2011, 12:31

I appreciate the team working on a very useful utility.
Thanks.
ben
Senior Member
 
Posts: 458
Joined: 24 Aug 2010, 03:11
Area of interest: Mechanical Engineering

Re: ClampOX® - Piping Box-up / Clamp Design

Postby Inspector007 » 03 Jul 2011, 12:33

Graet going Ashfaq , Tauseef & Team. Best of luck!
Regards
Nabeel
Inspector007
Core Member
 
Posts: 230
Joined: 04 Apr 2010, 09:38
Area of interest: Metallurgy Engineering

Re: CalmpOX® - Piping Box-up / Clamp Design

Postby ashfaqanwer » 04 Jul 2011, 05:52

Thanks everybody for your appreciation.
Attached please find one more snapshot of ClampOX®

ClampOX...PNG
You do not have the required permissions to view the files attached to this post.
ashfaqanwer
Site Moderator
 
Posts: 875
Joined: 16 Mar 2010, 03:36

Re: CalmpOX® - Piping Box-up / Clamp Design

Postby ashfaqanwer » 19 Jul 2011, 05:06

ClampOX has been released.
Download link has been added in the original post.
ashfaqanwer
Site Moderator
 
Posts: 875
Joined: 16 Mar 2010, 03:36

Re: CalmpOX® - Piping Box-up / Clamp Design - Released

Postby arcpro » 19 Jul 2011, 07:12

Congratulations on releasing another valuable software.
arcpro
Senior Member
 
Posts: 669
Joined: 16 Apr 2010, 18:46
Area of interest: Manufacturing Engineering

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Postby lbrahim » 19 Jul 2011, 08:36

Wao, that's a great software.
lbrahim
 

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Postby ashfaqanwer » 20 Jul 2011, 04:25

Thanks Ibrahim.
ashfaqanwer
Site Moderator
 
Posts: 875
Joined: 16 Mar 2010, 03:36

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Postby ben » 20 Jul 2011, 10:55

Thanks. A good software. Sketch feature is too good.
Appreciations for the team.
ben
Senior Member
 
Posts: 458
Joined: 24 Aug 2010, 03:11
Area of interest: Mechanical Engineering

Next

Return to Shops @ thePetroStreet

Who is online

Users browsing this forum: No registered users and 1 guest

cron