NDT Shop - Released

Here you can find FREE Engineering Softwares for your day-to-day working, engineered by professional and experienced team.

How do you rate NDT Shop

You may select 1 option

 
 
View results

Re: NDT Shop - Released

Postby ashfaqanwer » 02 Aug 2010, 17:01

So nice of you Qaisar for your appreciation.
ashfaqanwer
Site Moderator
 
Posts: 875
Joined: 16 Mar 2010, 03:36

Re: NDT Shop - Released

Postby Qaiser » 03 Aug 2010, 09:01

Kudos! ! !.... to thepetrostreet developers' team ! ! !
Really a handy thing!!
very helpful for non-inspection engineers too.
Qaiser
Core Member
 
Posts: 64
Joined: 29 Mar 2010, 06:46
Area of interest: Chemical Engineering

Re: NDT Shop - Released

Postby arcpro » 03 Aug 2010, 09:20

A useful utility.
I would like to add a comment here.
In one instance of fluid type and service conditions ASME B31.3 explicitly mentions that no provisions for this fluid service that is if a fluid is high pressure (rating > 2500) and toxic also, code says to review if category M fluid service apply and if it does not than code makes no provision for this fluid service. On the contrary, in NDT Shop, it's good that the stringent of the two requirements for examination has been mentioned but my suggestion is that the developer must add this note also under 'more' click.

Thanks for developing and sharing an easy to use tool.
arcpro
Senior Member
 
Posts: 669
Joined: 16 Apr 2010, 18:46
Area of interest: Manufacturing Engineering

Re: NDT Shop - Released

Postby kamran » 03 Aug 2010, 18:19

The good point over here is that NDT requirements, once specified, are a very straightforward thing unlike designing - you may require say 10%RT and so on and so forth. However, specifying them may not be very easy for a less experienced Engineer. This software removes that barrier and even a dunce can manage it on his own now.

Not bad at all!
kamran
Core Member
 
Posts: 62
Joined: 02 Apr 2010, 05:22
Area of interest: Manufacturing Engineering

Re: NDT Shop - Released

Postby ashfaqanwer » 04 Aug 2010, 16:46

Qaisar & kamran,
Thanks for your appreciation.

arcpro,
A very valid input. I would add that point in the next release, additionally I would also be adding one more point "only for non-metallic piping".
Thanks for providing your comments.
ashfaqanwer
Site Moderator
 
Posts: 875
Joined: 16 Mar 2010, 03:36

Re: NDT Shop - Released

Postby todoporron » 25 Jan 2012, 21:33

Great tool. Thanks a lot for the effort.
todoporron
 
Posts: 2
Joined: 25 Jan 2012, 21:21
Area of interest: Mechanical Engineering

Re: NDT Shop - Released

Postby ashfaqanwer » 06 Feb 2012, 04:43

Thanks todoporron.
ashfaqanwer
Site Moderator
 
Posts: 875
Joined: 16 Mar 2010, 03:36

Re: NDT Shop - Released

Postby hill » 08 Mar 2012, 07:57

helpful soft program, thanks a lot
hill
 

Re: NDT Shop - Released

Postby ashfaqanwer » 07 May 2012, 06:13

hill,
Thanks for your comments.
ashfaqanwer
Site Moderator
 
Posts: 875
Joined: 16 Mar 2010, 03:36

Re: NDT Shop - Released

Postby aeajah » 19 May 2012, 05:34

Really nice. Well done Guys!
aeajah
 
Posts: 2
Joined: 18 May 2012, 20:03
Area of interest: Mechanical Engineering

PreviousNext

Return to Shops @ thePetroStreet

Who is online

Users browsing this forum: No registered users and 1 guest

cron