ClampOX® - Piping Box-up / Clamp Design - Released

Here you can find FREE Engineering Softwares for your day-to-day working, engineered by professional and experienced team.

How do you rate ClampOX?

You may select 1 option

 
 
View results

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Postby amir96 » 06 Dec 2012, 04:44

please share attached.
regards
amir96
 

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Postby ashfaqanwer » 06 Dec 2012, 07:41

Amir96,
Please register and then login to download the attached software.
ashfaqanwer
Site Moderator
 
Posts: 875
Joined: 16 Mar 2010, 03:36

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Postby gamemax » 21 Sep 2014, 15:07

Thank you. Excellent!
gamemax
 
Posts: 1
Joined: 17 Sep 2014, 02:41
Area of interest: Mechanical Engineering

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Postby belonk182 » 25 Sep 2014, 01:20

Thanks...realy applicable software.
belonk182
 
Posts: 2
Joined: 22 Sep 2014, 00:05
Area of interest: Mechanical Engineering

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Postby levanc1a » 05 Nov 2017, 21:41

ashfaqanwer wrote:thePetroStreet team is about to release their next engineering software "ClampOX®" focusing on box-up /clamp design for piping leakages.
ClampOX® is capable of designing both hot box-up (welded) and cold box-up (bolted) based upon user's input.

Get your FREE copy:
clampox_setup.zip


Watch ClampOX video: http://www.youtube.com/watch?v=arZLnG47VhA

The salient features of ClampOX® are as follows:
1. Basic clamp thickness calculations based on ASME VIII pressure design formula
2. Calculation of weld leg dimension for hot box-up (welded)
3. Basic clamp thickness calculations for cold clamp on ASME VIII and structural analysis against line pressure / injection pressure
4. Commonly available and used materials for clamps / pipe / lug have been listed along with their stress values against input temperature
5. Provides liberty to the user for input of all required data if not in scope of ClampOX material library
6. Provides all the required output which a design engineer would require
7. Detailed sketch of cold box-up with all required dimensions including:
a. Clamp thickness
b. Lug thickness
c. Lug length
d. Lug width
e. Weld leg dimension for lug attachment
8. For bolted clamps, ClampOX generates the required bolt diameter and bolt spacing also however number of bolts have to be specified by user
9. General notes have been provided within the software for basic information of user
10. Free for use

Here is the first look of ClampOX®:
clampox.png


You are welcome to provide your comments / suggestions.

Hello
I want to registration this web to join
I work for piping section and I need ClampOX software. please advise me how to registration?
thank you very much


Last bumped by Anonymous on 05 Nov 2017, 21:41.
levanc1a
 

Previous

Return to Shops @ thePetroStreet

Who is online

Users browsing this forum: No registered users and 1 guest

cron