Flange face cut marks - acceptance

Mechanical / Civil engineering, Design of Pressure Vessels, Heat-exchangers, Piping, Steel / Civil Structure etc.

Flange face cut marks - acceptance

Postby skul » 06 Jan 2015, 07:28

We have been receiving some new material including flanges for our upcoming project.
Some of the flanges have been found with cut marks and other imperfections on raised face. Please let me know the acceptance criteria if we have findings on raised face of flanges.
skul
Senior Member
 
Posts: 90
Joined: 05 Mar 2011, 10:47
Area of interest: Mechanical Engineering

Re: Flange face cut marks - acceptance

Postby 999 » 10 Jan 2015, 07:10

Refer to Table 3 of ASME B16.5. That clearly mentions what you are asking.
Attached below is the image:
B16.5 Table 3.png
You do not have the required permissions to view the files attached to this post.
999
Senior Member
 
Posts: 117
Joined: 03 Jan 2012, 08:14
Area of interest: Mechanical Engineering


Return to Project Engineers

Who is online

Users browsing this forum: No registered users and 2 guests

cron