ClampOX® - Piping Box-up / Clamp Design - Released

Post a reply

Confirmation code
Enter the code exactly as it appears. All letters are case insensitive.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:
BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: ClampOX® - Piping Box-up / Clamp Design - Released

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Post by levanc1a » 05 Nov 2017, 21:41

ashfaqanwer wrote:thePetroStreet team is about to release their next engineering software "ClampOX®" focusing on box-up /clamp design for piping leakages.
ClampOX® is capable of designing both hot box-up (welded) and cold box-up (bolted) based upon user's input.

Get your FREE copy:
clampox_setup.zip


Watch ClampOX video: http://www.youtube.com/watch?v=arZLnG47VhA

The salient features of ClampOX® are as follows:
1. Basic clamp thickness calculations based on ASME VIII pressure design formula
2. Calculation of weld leg dimension for hot box-up (welded)
3. Basic clamp thickness calculations for cold clamp on ASME VIII and structural analysis against line pressure / injection pressure
4. Commonly available and used materials for clamps / pipe / lug have been listed along with their stress values against input temperature
5. Provides liberty to the user for input of all required data if not in scope of ClampOX material library
6. Provides all the required output which a design engineer would require
7. Detailed sketch of cold box-up with all required dimensions including:
a. Clamp thickness
b. Lug thickness
c. Lug length
d. Lug width
e. Weld leg dimension for lug attachment
8. For bolted clamps, ClampOX generates the required bolt diameter and bolt spacing also however number of bolts have to be specified by user
9. General notes have been provided within the software for basic information of user
10. Free for use

Here is the first look of ClampOX®:
clampox.png


You are welcome to provide your comments / suggestions.

Hello
I want to registration this web to join
I work for piping section and I need ClampOX software. please advise me how to registration?
thank you very much

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Post by belonk182 » 25 Sep 2014, 01:20

Thanks...realy applicable software.

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Post by gamemax » 21 Sep 2014, 15:07

Thank you. Excellent!

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Post by ashfaqanwer » 06 Dec 2012, 07:41

Amir96,
Please register and then login to download the attached software.

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Post by amir96 » 06 Dec 2012, 04:44

please share attached.
regards

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Post by ashfaqanwer » 04 Sep 2012, 14:09

adeelferoz,
Just login with your account details and download the attached file in the first post of this topic.
Hope this helps.

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Post by adeelferoz » 02 Sep 2012, 20:29

can any body share clamp oX software for designing pipe clamp really appreciate the help

Regards

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Post by gten » 11 Jul 2012, 08:45

thanks a lot everyone.

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Post by getanasmalik » 11 Jul 2012, 07:06

It is really a well organized application hats off to THE TEAM

Re: ClampOX® - Piping Box-up / Clamp Design - Released

Post by ashfaqanwer » 07 May 2012, 06:11

Thanks hammad for your comments.

Top

cron